Paint Protection Film Packages
Clear or Matte Film
Bumper Only
This Package Includes:
- Front bumper
- Headlights
Clear or Matte Film
Partial Coverage
This Package Includes:
- Front bumper
- Partial hood
- Mirrors
- Partial front fenders
- Headlights
Clear or Matte Film
Full Front
This Package Includes:
- Front bumper
- Full hood
- Mirrors
- Full front fenders
- Trunk
- Headlights
- Fog lights
Clear or Matte Film
Full Coverage
Full vehicle PPF covers all the painted surfaces of your car to keep them looking sharp and minimize wear from road debris. It does not include black plastic trim, like the accents on some BMWs, Audis, or Volkswagens, so those areas would need a separate treatment if you want them covered.
San Antonio, TX’s Home for Pro PPF Installation
I carefully designed our Paint Protection Film (PPF) installation service to ensure every detail looks exceptional. Each panel is carefully measured and applied, so the film sits evenly, covering the areas that take the most wear. The goal is a clean, long-lasting finish that keeps your paint looking sharp without cutting corners.
Book Your PPF Installation Service
PPF’s Big Impact on Your Paint
Durable Barrier Against Damage
PPF acts like a tough shield for your paint, absorbing impacts from rocks, road debris, and minor scratches. It keeps your car looking sharp even after daily driving and harsh road conditions. For extra protection, Jays Detail Studio offers an 11.5 mil PPF at an additional cost.
Self-Healing Composition
Many PPF films are self-healing, which means minor scratches and swirl marks disappear on their own with heat from the sun or a warm water rinse. This keeps the finish looking great and reduces the need for touch-ups.
Maintains Appearance
PPF helps your car stay looking clean and glossy over time. It preserves the paint’s original finish so your vehicle keeps its fresh, polished look without constant maintenance.
Easy to Clean
The surface of PPF makes washing simple. Dirt, grime, and road contaminants rinse off easily, letting you spend less time cleaning and more time enjoying your car.
Flexible Coverage Options
PPF can be applied to high-impact areas or full-body coverage, depending on what you need. You can protect the spots that take the most wear while keeping other areas untouched or coated as desired.
CALL (210) 863-1633
Paint Protection Film Service FAQs
1. What is paint protection film?
Paint protection film is a clear, durable layer that goes over your paint to absorb impacts from rocks, road debris, and scratches. It keeps your paint looking sharp while letting the car’s finish show through, and it can be glossy or matte depending on what you choose.
2. How long does PPF last?
High-quality PPF can last several years with proper care. Its durability depends on exposure to the sun, road conditions, and how well you maintain it with gentle washing.
3. Does it cover the whole car?
PPF can cover all painted surfaces, but black plastic trim and accents are usually not included. Those areas can be treated separately if you want full coverage.
4. Can I wash and wax my car after PPF?
Yes, you can wash your car normally, but it’s best to avoid abrasive brushes or harsh chemicals. Gentle soaps and microfiber towels keep the film looking smooth and prevent scratches.
5. Can PPF be removed?
Yes, PPF can be safely removed without damaging your paint. Whether you want to replace it, switch to a different finish, or sell the car, it comes off clean when done correctly.
CALL (210) 863-1633
Jay’s PPF Installation Process
Getting PPF installed the right way takes time and attention to detail. Here’s the step-by-step process I follow to make sure every panel looks smooth and flawless.
1. Clean and Prep the Surface
Before applying the film, I thoroughly wash and decontaminate the vehicle. Removing dirt, dust, and any leftover wax or sealants ensures the film sticks properly and doesn’t create any bubbles or creases.
2. Measure and Cut the Film
Next, I measure each panel and cut the film to fit precisely. This step is critical to make sure the edges line up perfectly and high-impact areas are fully covered.
3. Apply the Film
Using a careful, methodical approach, I apply the film to each panel. I smooth out bubbles and wrinkles as I go to ensure a flawless finish.
4. Trim and Finish
After the film is in place, I trim any excess and make sure the edges are clean and tight. This gives the installation a professional, seamless look.
5. Final Inspection
Once the film is installed, I inspect every panel to confirm it was installed correctly with no flaws. Any small adjustments are made before the car leaves the shop, so you get the best results possible.
Getting Ready for Your PPF Service
Prepping your vehicle before a paint protection film installation sets the stage for the best result. A little attention ahead of time saves time in the shop and helps guarantee a clean, lasting finish.
Give Your Car a Deep Clean
Bring your vehicle in freshly washed. Any dirt, dust, or road grime left behind can show through the film or prevent it from adhering properly. A spotless surface ensures the film looks seamless once applied.
Avoid Wax and Coatings
Skip the wax or sealants before your appointment. These create a slick surface that makes it harder for the film to bond. The best foundation is clean, untreated paint.
Inspect the Paintwork
Look over your car for scratches, chips, or peeling clear coat. PPF adheres best to smooth paint. Taking care of imperfections beforehand helps the film sit flat and deliver the flawless look you expect.
Clear Out the Interior
Please remove any personal items or loose belongings from inside the vehicle. This makes it easier and safer to work around doors, panels, and trim without anything in the way.
Allow Enough Time
Installing PPF isn’t a quick in-and-out job. Depending on coverage and vehicle design, your car may need to stay with us for several hours or longer. Plan your schedule accordingly so we have the time needed to do it right.
CALL (210) 863-1633
